Display Screen

Panel Display

The display panel is shown in the following figure

Introduction

System Maintenance

To maintain optimal long-term performance, it is recommended to perform the following inspections twice a year:

Ensure that airflow around the equipment is not blocked, and remove any dirt or debris from the heat sink.

Check if all exposed wires have insulation damage due to sunlight, friction with other objects, dry rot, insect or rodent damage, and repair or replace wires if necessary.

Verify that the indicators and displays match the equipment operation. Pay attention to any fault or error displays and take corrective actions if necessary.

Check all terminals for corrosion, insulation damage, high temperature or burning / discoloration, and tighten terminal screws.

Check for dirt, nesting insects and corrosion, and clean as required.

Warning: Risk of electric shock! When performing the above operations, ensure that all power supplies of the equipment are disconnected, and all capacitor power is discharged before conducting corresponding inspections or operations!

The company shall not be liable for damages caused by the following circumstances:

Damage caused by improper use or use in inappropriate places.

Photovoltaic module open circuit voltage exceeds the maximum allowable voltage.

Damage caused by working environment temperature exceeding the limited working temperature range.

Unauthorized disassembly and repair of the inverter.

Damage caused by force majeure: damage occurring during transportation or loading and unloading.

Technical Parameters